JV “OLNOVA offers a complete technical solution for crushing and sorting of household, commercial and non-toxic mixed MSW (municipal solid waste). Line is used in landfills, or separately constructed plants for crushing and sorting of different waste: household waste, mixed waste, construction waste, organic and inorganic waste, waste paper and polymers, with a view to their further reuse and recycling.

The Line consists of:

  • Hopper to load debris
  • Separator (sieve) drum-type
  • Sorting cabin

A Hopper for loading garbage

In the hopper for loading debris, (POS.1 Fig.1), with a volume of 2 m3, loader or directly from the car, loaded raw materials. (In the case of Assembly line Pogrebnyak dishwasher loading is done directly from the conveyor of the machine). The hopper is equipped with a removable table which can be moved depending on desired side of the boot.

From the hopper to load the raw material is supplied with a loading conveyor (rubber belt) in the separator drum type. The hopper is equipped with an emergency stop button conveyor. Conveyor drive: gear motor 5.5 kW.; conveyor belt with corrugated surface: width 1.0 m, length 6.1 m, a belt speed of 2.5 m/sec.

Bunker dimensions: length 2.5 m, width 1.6 m; height 1.5 m. The weight of the hopper 1.8 tons.

Drum Separator type

From the hopper by a conveyor, the material is fed into the separator drum type (POS.2 Fig.1), which is suitable for sieving of organic and biological waste. The separator is a metal construction drum type with internal dokshicy auger, lined with metal mesh two sections with dimensions 30×30 mm and 50×50mm, which are supplied on a metal frame. On the inside of the separator also placed a knife to break plastic bags.

When the drum rotates, the material passes through the separator: 30% of the material, mainly organic and biological waste ProSuite screened material can be used for recultivation of the landfill or for further composting.

The drive of the drum is carried out through four wheels from one of the gear motor 5.5 kW.

The speed of rotation of the drum is 9.1 rpm Length 2 Western auger drum 60 meters.

The drum diameter is 3.2 m, the length of the separator of 7.3 m, total height of 6.3 m.

If necessary, the drum can be equipped with restrictive plates that are attached to the supports, or bin for waste.

Sorting cabin

After sieving in the drum the rest of the bulk material on the conveyor is served in the sorting cabin (POS.3 Fig.1) for manual sorting of waste for certain types: paper, plastic waste, wood, leather, glass, metal, etc. are Graded raw material is collected in storage bins with a volume of 0.2 m3. The bottom of the hopper is so arranged that by means of the counterweight allows you to adjust the amount of raw materials. After the weight of the raw material comes to the necessary, the bottom is opened and the waste is poured into the container, placed under Sortovala cabin. The number and type of containers depends on the possibility of transporting them. The number of jobs in the sorting cabin depends on the amount of waste that can be sorted, and is eight or sixteen men.

The cabin is equipped with ventilation, heating system, lighting and emergency stop buttons of the movement of the conveyor belt, located between workplaces on the frame of the conveyor. The cabin also has an electric remote control of the whole line.

The rest of the material that remains from the sorting goes to landfill.
The width of the belt 1.4 m, a belt speed of 0.1 – 0.3 m/sec. The length of the sorting cabin with conveyor 15,5 m, width 4.6 m, the Total weight of 6.5 tons.
The line is mounted on a solid, level surface, in the application of concrete or asphalt, if necessary under the feet of the cockpit and the separator includes a metal plate to reduce the load.
If necessary, grinding input material input instead of the hopper to load can be mounted primary shredder VB 650 or VB 750.

There is also the possibility of additional manufacturing and installation of various containers, conveyors, magnet, press for the compressible tailings, as well as the acquisition.

We offer: planning; production; commissioning; training; warranty and service; supply of components and spare parts.
There is also the possibility of additional manufacturing various containers, conveyors, etc., and purchase of trucks of German manufacture, the magnet presses.


Description Value
Overall dimensions:
Total length 31.13
Width, m 9.15
Height, m 6.24
The Speed of movement of raw materials in the sorting cabin along the line (tape speed), m/s 0.3
The drum rotation Frequency, Rev/min 9.1
The size of the mesh openings of the drum, mm 50*50
The height of the gap under the drum, mm 3000
The height of the gap under the cab, mm 3000
The Height of release of waste from the cab, mm 4140
The Number of jobs in the cab, pers. 8-12
The Width of the ribbon of loading conveyor, mm 1000
Width of the conveyor belt cab, mm 1400
Power Consumption 380
Total power capacity, kW (full) 22.82
Capacity, ton/HR 10.15

«OLNOVA» offers:

  • Planning
  • Manufacturing
  • Commissioning
  • Training
  • Guarantee
  • Supply of components and spare parts

Photo Gallery:

Video Gallery: