Chippers DP 660 T (special)
Derivatively machine 660 DP T (special) is designed for grinding of wood waste: how it works: lagging, rails, slabs, tops and branches of trees in technological and fuel wood chips.
Used in sawmills, logging companies, sawmills, pulp and paper mills, utilities and private enterprises. Due to the fact that the machine is equipped trailer can be used along with the trailer, allowing you to transport the ground material together with the machine to its destination.
The use of wood chips: production boards, production of fuel briquettes and pellets, thermal power plants, for heating in boilers and more.
- Disc type with two adjustable rublenymi knives and one knife.
- Crushing disk:
- diameter 1020 mm
- 70 mm
- Size of crushed wood:
- diameter up to 270mm
- width up to 270 mm
- length of 500 mm and more
- Size fractions of wood chips output: 5 – 50 mm
- the size of the non-liquid fraction (10%) 120-150 mm
- Сapacity up for: 20 m3/hour
- Pipe the discharge of chips easily rotates 360°
- ejection Height chip: up to 3.6 m
- Hydraulic system is used when feeding wood into the working area
- In the main building has two satguy cushions
- Each roller has a separate hydraulic drive the hydraulic motors
- hydraulic Motors are driven by hydraulic pump.
- Toregulate oil flow in the system allows you to adjust the number of revolutions of protracted rollers, thereby adjusting the particle size of wood chips output
- the control Valve allows you to change the direction of rotation of rollers
- To the hydraulic system includes an oil filter and the oil level
- Hydraulic folding pipe chips ejection cylinder
- Hydraulic pipe rotation discharge of chips motor
Derivatively machine is aggregated with tractors T-150, John Deere, HTZ-150K, HTZ-17221, MTZ-1221 and other similar class, with a capacity of 100 K. C. and 1000 rpm, which have a PTO shaft.
The machine is mounted as a wall unit on the 3-point Gdansk tractor and trailer equipped.
The machine is powered from the PTO of the tractor through the drive couple with a freewheel that allows you to reduce the attacks on slam GDP tractor.
Specifications:Derivatively machine is aggregated with tractors T-150, John Deere, HTZ-150K, HTZ-17221, MTZ-1221 and other similar class, with a capacity of 100 K. C. and 1000 rpm, which have a shaft the PTO. The machine is mounted as a wall unit on the 3-point Gdansk tractor and trailer equipped. The drive of the machine is effected from the shaft to the power takeoff of the tractor through the drive couple with a freewheel that allows you to reduce the attacks on slam GDP tractor.
|Rotational speed of the disk about./min.||1000|
|The feed Rate of wood, M. S.||0...0,6|
|Performance, m 3/hour||18-20|
|The Height of release of raw materials, M.||3,6|
|The Height of the pipe, mm||3600|
|The Height of the pipe, mm||1750|
- Supply of components and spare parts