DP 660 T chopper machine (special) cradle base
The wood crushing machine DP 660 T wheelbase (special) is designed for shredding wood waste: obapol, rails, slams, tops and branches of trees in process and fuel chips.
It is used in sawmills, logging enterprises, woodworking enterprises, pulp and paper mills, public utilities and private enterprises. Due to the fact that the machine is equipped with a trailer, it can be used together with a trailer, which allows you to transport the crushed material along with the machine to its destination.
The use of chips: the production of chipboard, the production of fuel briquettes and pellets, thermal power plants, for heating in boilers and more.
Технічні дані:
- Дискового типу з двома регульованими рубальними ножами та одним контрножем.
- Дробильний диск:
- діаметр 1020 мм
- товщина 70 мм
- Розміри подрібнювальної деревини:
- діаметр до 290мм
- ширина до 310 мм
- довжина від 500 мм і більше
- Розміри фракції щепи на виході: 5 – 50 мм
- Розмір неліквідної фракції (5%) 120-150 мм
- Продуктивність від: 18 м3/год.
- Труба викиду щепи легко обертається на 360°
- Висота викиду щепи: до 3,6 м
- Колісна база
Гідравлічна система:
Technical data of the shot tree:
- Disk type with two adjustable knife blades and one counter knife.
- Crushing disk:
- diameter is 1020 mm
- thickness 70 mm
- Sizes of the crushed wood:
- diameter up to 290mm
- width up to 310 mm
- length from 500 mm and more
- The size of the chip fraction at the exit: 5 – 50 mm
- The size of the illiquid fraction (10%) is 120-150 mm
- Productivity from: 20 m3 / hour.
- Chip discharge tube rotates 360 ° easily
- Chip height: up to 3.6 m
- Wheelbase
Hydraulic system:
- The hydraulic system is used when feeding wood into the work area.
- Two zataguyuchy rollers are installed in the main building
- Each roller has a separate hydraulic drive from hydraulic motors.
- Hydraulic motors are driven by a hydraulic pump.
- Hydro-regulator of the oil flow in the system allows you to adjust the speed of the draw rollers, thereby adjusting the size of the chip fraction at the output
- The valve allows you to change the direction of rotation of the rollers
- Hydraulic systems include oil filter and oil level.
- Hydraulic folding of the pipe ejection of chips in a cylinder
- Hydraulic rotation of the pipe exhaust chips hydraulic motor
Specifications:
The wood crusher is aggregated with tractors T-150, John Deere, XTZ-150K, XTZ-17221, MTZ-1221 and others of a similar class, with a capacity from 100 to. C. and 1000 rpm, which have a PTO.
The machine is mounted as a mounted unit on a 3-point tractor tractor and equipped with a trailer.
The machine is driven from the tractor’s power take-off shaft through a cardan pair with an overrunning clutch, which allows reducing blows to the tractor’s GDP.
Specifications:
The wood crusher is aggregated with tractors T-150, John Deere, XTZ-150K, XTZ-17221, MTZ-1221 and others of a similar class, with a capacity from 100 to. C. and 1000 rpm, which have a shaft power take-off. The machine is mounted as a mounted unit on a 3-point tractor tractor and equipped with a trailer. The drive of the machine is carried out from the shaft of the tractor power take-off through the cardan pair with the overrunning clutch, which allows reducing the blows at the tractor's GDP.Power, cc. td> | 100 td> tr> | ||||||||||||||
Disk rotational speed, rpm. td> | 1000 td> tr> | ||||||||||||||
Wood feed rate, m / s. td> | 0 ... 0.6 td> tr> | ||||||||||||||
Performance, m 3 sup> / hour. td>
18-20 td>
tr>
| Raw material emission height, m. td>
| 3.6 td>
tr>
| Dimensions: td>
| td>
tr>
| Length mm td>
| 2800 td>
tr>
| Height with pipe, mm. td>
| 4000 td>
tr>
| Height without pipe, mm td>
| 2200 td>
tr>
| Width mm td>
| 2450 td>
tr>
| Weight, kg td>
| 2400 td>
tr>
tbody>
table>
| «OLNOVA» offers:
Photo Gallery:Video Gallery: |