The use of chips: the production of chipboard, the production of fuel briquettes and pellets, thermal power plants, for heating in boilers and more.

Technical data of the shot tree:

• Disk type with two adjustable knife blades and one counter knife.
• Crushing disk:
• diameter is 1020 mm
• thickness 70 mm
• Sizes of the crushed wood:
• diameter up to 290mm
• width up to 310 mm
• length from 500 mm and more
• The size of the chip fraction at the exit: 5 – 50 mm
• The size of the illiquid fraction (10%) is 120-150 mm
• Productivity from: 20 m3 / hour.
• Chip discharge tube rotates 360 ° easily
• Chip height: up to 3.6 m
• Wheelbase

Hydraulic system:

• The hydraulic system is used when feeding wood into the work area.
• Two zataguyuchy rollers are installed in the main building
• Each roller has a separate hydraulic drive from hydraulic motors.
• Hydraulic motors are driven by a hydraulic pump.
• Hydro-regulator of the oil flow in the system allows you to adjust the speed of the draw rollers, thereby adjusting the size of the chip fraction at the output
• The valve allows you to change the direction of rotation of the rollers
• Hydraulic systems include oil filter and oil level.
• Hydraulic folding of the pipe ejection of chips in a cylinder
• Hydraulic rotation of the pipe exhaust chips hydraulic motor

Specifications:

The wood crusher is aggregated with tractors T-150, John Deere, XTZ-150K, XTZ-17221, MTZ-1221 and others of a similar class, with a capacity from 100 to. C. and 1000 rpm, which have a PTO.

The machine is mounted as a mounted unit on a 3-point tractor tractor and equipped with a trailer.

The machine is driven from the tractor’s power take-off shaft through a cardan pair with an overrunning clutch, which allows reducing blows to the tractor’s GDP.